Søk i SKU …

Filter

show blocks helper

Leverandør

Måleparameter

Miljø

Produkt Grensesnitt

Search…

SB-110: Barometric Pressure Sensor

Ca. 15 – 115 kPa

Legg til i ønskeliste
Legg til i ønskeliste
Produktnummer: SB-110 Kategori: Stikkord:

Apogee Instruments SB-110 barometric pressure sensors combine excellent performance and affordability in a small, handy sensor. The sensor works well as a stand-alone product or it can be combined with sensors affected by barometric pressure, such as our line of oxygen sensors. The SB-110 consists of a silicon capacitive sensing element and signal processing circuitry mounted in a compact epoxy plastic/stainless steel housing and lead wires to connect to a measurement device. Sensors are weather resistant and are designed for continuous barometric pressure measurement when housed inside the same enclosure as the measurement device (e.g., datalogger or controller). Typical applications include pressure measurement in weather networks, often for weather forecasting and to correct the output of sensors sensitive to pressure changes. SB-110 pressure sensors output an analog voltage that is directly proportional to barometric pressure.

• Product Manual

• Specification Sheet

• Technical Drawing

Tilleggsinformasjon

Måleparameter

Grensesnitt

,

Spesifikasjoner

  • Measurement Range:15 to 115 kPa (approximate)
  • Maximum Pressure Exposure: 400 kPa (exposure beyond this limit may cause permanent damage to sensor)
  • Sensitivity: 45.0 mV per kPa; 0.45 mV per 0.01 kPa (approximate)
  • Calibration Factor: 0.0224 kPa per mV (generic slope; reciprocal of sensitivity) and 9,63 kPa (generic intercept)
  • Measurement Uncertainty: ± 1.5 % (with generic calibration coefficients)
  • Measurement Repeatability: Less than 0.1 %
  • Long-term Drift (Non-stability) Less than 1 % per year
  • Non-linearity: Less than 1 %
  • Warm-up Time: 20 ms
  • Response Time: 1 ms
  • Temperature Response: 0.01 % per C
  • Operating Environment: -40 to 100 C, 0 to 100 % relative humidity (non-condensing)
  • Input Voltage Requirement: 4.75 to 5.25 V DC
  • Output Voltage Range: 0.2 to 4.7 V DC
  • Current Drain: Typical: 6 mA DC; Maximum: 10 mA DC
  • Dimensions: 187 mm x 17 mm x 9 mm (L x W x H)
  • Mass: 5 g
  • Cable: 120 mm pigtail
  • Warranty: 4 years against defects in materials and workmanship