Campbell Scientific: CR310 Datalogger
Veldig robust, fleksibel og pålitelig datalogger, egnet for vitenskapelige applikasjoner og alle typer feltstasjoner.
Overview
The CR310 is a multi-purpose, compact, low-cost measurement and control data logger that includes an integrated 10/100 Ethernet port and removable terminal connectors. This entry-level data logger, with its rich instruction set, can measure most hydrological, meteorological, environmental, and industrial sensors. It will concentrate data, making it available over varied networks and deliver it using your preferred protocol. The CR310 also performs automated on-site or remote decision making for control and M2M communications. The CR310 is ideal for small applications requiring long-term, remote monitoring and control.
The primary differences between the CR300 and CR310 are that the CR310 offers removable connectors and a 10/100 Ethernet connection.
The CR310 has multiple radio options that are suitable for different regions:
- CR310-RF407: US and Canada
- CR310-RF412: Australia and New Zealand
- CR310-RF422: Europe
- CR310-RF427: Brazil
Note: Campbell Scientific does not recommend the CR310 for use as a PakBus router in networks with more than 50 devices. Large arrays or string variables may also reach memory limits. For such applications, a CR1000X Measurement and Control Datalogger is recommended.
Benefits and Features
- Set up easily with PC software and USB connectivity
- Measure with confidence analogue and digital sensors
- Internet ready–email, FTP, HTTP/web, TCP–with required add-ons
- Trust in the Campbell Scientific quality, including integral surge and ESD protection
- Save money and space using the integrated Ethernet port
- Network wirelessly to another node or Internet gateway with integrated radio option
- CR310-WIFI ideal for short-range, wireless IP communication
- Wiring made easy through removable terminal block
- Communicate from anywhere when using cellular or satellite peripheral
- Charge batteries using the integrated 12 V battery solar charge regulator
- Measure smart sensors using RS-232 or SDI-12
- Connect with PakBus, Modbus, DNP3, GOES, and other standard communication protocols
- Analyze and control with programmability and multiple general purpose I/O
- Notify with event-driven communications and physical outputs
Spesifikasjoner
NOTE- | Additional specifications are listed in the CR300-Series Specifications Sheet. |
Operating Temperature Range |
|
Maximum Scan Rate | 10 Hz |
Case Material | Powder-coated aluminum |
Analog Inputs | 6 single-ended or 3 differential (individually configured) |
Pulse Counters | 8 (P_SW, P_LL, C1, C2, and SE1 to SE4) |
Voltage Excitation Terminals | 2 (VX1, VX2) |
Communications Ports |
|
Switched 12 Volt | 1 terminal |
Digital I/O | 7 terminals (C1, C2, P_SW, and SE1 to SE4) configurable for digital input and output. Includes status high/low, pulse width modulation, external interrupt, and communication functions. Exception: The SE4 terminal doesn’t do external interrupt. |
Input Limits | -100 to +2500 mV |
Analog Voltage Accuracy |
|
ADC | 24-bit |
Power Requirements | 16 to 32 Vdc for charger input (CHG) (Current limited to 0.9 A maximum for power converter or solar panel input.) |
Power Requirements | 10 to 18 Vdc for external batteries (BAT) |
Real-Time Clock Accuracy | ±1 min. per month |
Internet Protocols | Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP(APIPA), IPv4, IPv6, UDP, TCP, TLS (v1.2), DNS, DHCP, SLAAC, NTP, Telnet, HTTP(S), FTP(S), SMTP/TLS, POP3/TLS |
Communication Protocols | PakBus, Modbus, DNP3, SDI-12, TCP, UDP, and others |
CPU Drive/Programs | 80 MB serial flash |
Data Storage | 30 MB serial flash |
Idle Current Drain, Average | 10 mA (@ 12 Vdc with Ethernet link idle) |
Active Current Drain, Average | 56 mA (@ 12 Vdc with Ethernet link active, processor always on) |
Dimensions | 16.26 x 7.62 x 5.68 cm (6.4 x 3.0 x 2.2 in.) |
Weight | 288 to 306 g (0.64 to 0.68 lb) depending on communication option selected |
Technical description
Terminal Descriptions
- One switched 12 V terminal (SW12V) for powering sensors or communication devices, 1100 mA @ 20°C
- Two sensor excitation or continuous 0.15 to 5 V terminals (VX1, VX2) for sensor excitation or output control
- Six multipurpose analogue input terminals (SE1 – SE6)
- Analogue functions (SE1 – SE6)
- Analogue inputs: 6 single-ended or 3 differential inputs with -100 to +2500 mV and ±34 mV ranges 24 bit ADC
- 4 to 20 mA or 0 to 20 mA inputs (SE1, SE2 only)
- Digital I/O functions (SE1 – SE4) consist of 3.3 V logic levels for:
- High frequency counter (35 kHz)
- Pulse width modulation
- Interrupts and timer input
- Period average (200 kHz, amplitude dependent)
- Analogue functions (SE1 – SE6)
- Two Pulse Counting Terminals (P_SW, P_LL)
- P_SW
- Switch closure (150 Hz)
- High frequency counter (35 kHz)
- P_LL
- Low level ac (20 kHz)
- High frequency counter (20 kHz)
- P_SW
- Two Control Terminals (C1, C2): C terminals are software configurable for digital functions
- Digital I/O functions consist of 5 V output and 3.3 V input logic levels for:
- SDI-12
- High frequency counter (3 kHz)
- Switch closure (150 Hz)
- General status/control
- Voltage source 5 V: 10 mA @ 3.5 V
- Interrupts
- Serial asynchronous communication Tx/Rx pair
- Digital I/O functions consist of 5 V output and 3.3 V input logic levels for: